- General Information
- Manufacturer
- Tripp Lite by Eaton
- Manufacturer Website Address
- https://tripplite.eaton.com/
- Brand Name
- Tripp Lite by Eaton
- Product Line
- SmartPro
- Product Type
- Line-interactive UPS
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload, low battery and more
- 8 NEMA 5-15R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
- 570-joule surge suppression rating
Reliable Battery Backup with Expandable Runtime
- Supports half load up to 14 min. and full load up to 4.9 min.
- Internal batteries designed for hot-swap field replacement
- Expandable runtime with optional external battery packs, such as Tripp Lite's BP36V15-2U
- 95% line-power efficiency rating saves money in energy costs
Switchable Outlets
- 2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 120V nominal output over input range of 83V-145V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
- Front-panel LCD monitors power status, operating data, voltage, alarm and other options
- Rotates for easy viewing in rack-mount or tower configurations
Optional Network Management Cards
- Compatible with Tripp Lite UPS management cards, including TLNETCARD, WEBCARDLX and SNMPWEBCARD
Communications Ports
- USB and DB9 ports enables data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from tripplite.eaton.com/products/power-alert
- EPO port supports emergency shutdown in large facilities
Versatile Installation Options
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
- Mounts to front rails of 2- or 4-post rack with optional UPSHDEARKIT accessory
TAA Compliant
- Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Warranty
- Limited Warranty
- 2 Year
- Technical Information
- Plug/Connector Type
- NEMA 5-15P
- Receptacle Type
- NEMA 5-15R
- Receptacle Detail
- 8 x NEMA 5-15R
- Emergency Power OFF
- Yes
- Power Description
- Load Capacity (VA)
- 1500 VA
- Load Capacity (Watt)
- 1350 W
- Input Voltage
- 110 V AC
- Input Current
- 10.10 A
- Output Voltage
- 120 V AC
- Management
- Network Management
- SNMP Manageable
- Interfaces/Ports
- Serial Port
- Yes
- USB
- Yes
- Battery Information
- Backup/Run Time (Full Load)
- 4.90 Minute
- Backup/Run Time (Half Load)
- 14 Minute
- Typical Battery Recharge Time
- 4.50 Hour
- Hot Swappable
- Yes
- Physical Characteristics
- Height
- 3.5"
- Width
- 17.5"
- Depth
- 13.5"
- Rack Height
- 2U
- Form Factor
- Rack/Tower
- Weight (Approximate)
- 43.50 lb
- Miscellaneous
- Package Contents
- SmartPro SM1500RMXL2UTAA 1500 VA Tower/Rack Mountable UPS
- PowerAlert Software
- USB Cable
- Serial Cable
- Mounting Hardware for 4 Post Rackmount Installation
- Cable for Emergency Power Off Interface
- Instructional Manual with Warranty Information
- Certifications & Standards
- UL 1778
- CSA
- FCC Part 15 Category B (EMI)
- TAA
- Software Included
- PowerAlert Software
- Country of Origin
- Taiwan
- TAA Compliant
- Yes
- Environmentally Friendly
- Yes
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)
